Mowgli
Member
Awhatup Control Booth aficionados.
I’m having difficulty programming our lighting setup.
Here are the products I am using.
Venue Magic DMX+AVI
VenueMagic DMX+AV 2.5
X-Bubble CW 600k LEDs (about 150 of them)
Home - Acclaim Lighting
X-Bubble Driver PCB (48 port)
Home - Acclaim Lighting
and finally
XB-R1 Setup Controller
Home - Acclaim Lighting
So I do not have any experience with lighting. I am mainly a marketing guys with a knack for Marketing and computers.
So there is a dongle that goes from USB to the DMX IN on the driver board (we have 6 of them). The transformer which powers the Driver is wired correctly and when I plug in one of the X-Bubble LEDs it flashes rapidly.
I have the Setup Controller and have no idea how to use it or what option I am going for. I need to set up the driver boards so that I can control them and give them different lighting cue via the VenueMagic program and the DMX IN/Dongle.
Options:
Setup No Answer
Setup With Answer
DMX Controller
If you guys could advise I would be extremely grateful.
Goals:
Allow each of the 6 boards to receive my lighting cues via VenueMagic and have the LEDs availabel for me to help.
I’m having difficulty programming our lighting setup.
Here are the products I am using.
Venue Magic DMX+AVI
VenueMagic DMX+AV 2.5
X-Bubble CW 600k LEDs (about 150 of them)
Home - Acclaim Lighting
X-Bubble Driver PCB (48 port)
Home - Acclaim Lighting
and finally
XB-R1 Setup Controller
Home - Acclaim Lighting
So I do not have any experience with lighting. I am mainly a marketing guys with a knack for Marketing and computers.
So there is a dongle that goes from USB to the DMX IN on the driver board (we have 6 of them). The transformer which powers the Driver is wired correctly and when I plug in one of the X-Bubble LEDs it flashes rapidly.
I have the Setup Controller and have no idea how to use it or what option I am going for. I need to set up the driver boards so that I can control them and give them different lighting cue via the VenueMagic program and the DMX IN/Dongle.
Options:
Setup No Answer
Setup With Answer
DMX Controller
If you guys could advise I would be extremely grateful.
Goals:
Allow each of the 6 boards to receive my lighting cues via VenueMagic and have the LEDs availabel for me to help.