So I'm in a pickle. The audio rig I'm working on was previously somewhat controlled by a Crestron system, but after it bit us too many times we pulled all the Crestron out of the system. We have D&B D10, D30, and D80 amplifiers. The audio desk is a CL5, in between all of it is a redundant Dante network and Symmetrix DSPs to feed audio to the amps.
I'm interested in the autostandby and wakeup function because Crestron was our way of turning the amps on and off, and without it my only other option is to do it through the R1 software, which is not exactly a streamline process.
Does anyone know if there's a good way to get the CL5 to send a slightly higher signal to the outputs? I'm finding there isn't any difference in noise on the line between the console being on and off, so the amps currently don't have anything to work off that will ensure the amps are on as long as the console is on.
I'm interested in the autostandby and wakeup function because Crestron was our way of turning the amps on and off, and without it my only other option is to do it through the R1 software, which is not exactly a streamline process.
Does anyone know if there's a good way to get the CL5 to send a slightly higher signal to the outputs? I'm finding there isn't any difference in noise on the line between the console being on and off, so the amps currently don't have anything to work off that will ensure the amps are on as long as the console is on.