Hello everyone,
First post here so I hope I can find some help. I'm slated to do a show inside of an airport hangar. Upon my initial walk through I was told I can use the 220 volt plugs that they plug the corporate jets into to power the electrics in the plane. I have never done this before usually I have just used either standard 120 volt household type ac plugs or a gas generator.
I'll be supplying the PA system and stage lighting (standard array of equipment). So my question is....How would I go about taking the 220 plugs and getting my gear powered up. Would a power distro be of help? or should I just avoid this and bring a generator and go that route.
If i am missing any info please let me know. I really want to do this gig properly and not look like a bafoon or blow the airport up
Thanks
CaptPaul
First post here so I hope I can find some help. I'm slated to do a show inside of an airport hangar. Upon my initial walk through I was told I can use the 220 volt plugs that they plug the corporate jets into to power the electrics in the plane. I have never done this before usually I have just used either standard 120 volt household type ac plugs or a gas generator.
I'll be supplying the PA system and stage lighting (standard array of equipment). So my question is....How would I go about taking the 220 plugs and getting my gear powered up. Would a power distro be of help? or should I just avoid this and bring a generator and go that route.
If i am missing any info please let me know. I really want to do this gig properly and not look like a bafoon or blow the airport up
Thanks
CaptPaul