stradivarius
Member
Hi,
I don't now if this would be the right forum for this question, but anyway:
I currently designing a small/medium sized rig for a band and the lighting is based on hanging on 4 separate trusses standing on the floor. One problem I've come up with is how I am supposed to rig these trusses so they won't fall, as I'm not used to work with standing trusses. Anyone have a clue to how the problem could be solved.
Each truss consist of 1 Mac 500, 1 Mac 600, 1 atomic 3000 strobe, 1 4-light blinder and a par 64 sixbar.
Adding a picture of what I have in mind.
Thanks for the help
I don't now if this would be the right forum for this question, but anyway:
I currently designing a small/medium sized rig for a band and the lighting is based on hanging on 4 separate trusses standing on the floor. One problem I've come up with is how I am supposed to rig these trusses so they won't fall, as I'm not used to work with standing trusses. Anyone have a clue to how the problem could be solved.
Each truss consist of 1 Mac 500, 1 Mac 600, 1 atomic 3000 strobe, 1 4-light blinder and a par 64 sixbar.
Adding a picture of what I have in mind.
Thanks for the help