I started building the system a few days ago, so far i'm about 1/2 way through the powersupply/base station thingy. I'm just waiting for the capacitors and 2 extra XLR plugs.
I started building the system a few days ago, so far i'm about 1/2 way through the powersupply/base station thingy. I'm just waiting for the capacitors and 2 extra XLR plugs.
I started building the system a few days ago, so far i'm about 1/2 way through the powersupply/base station thingy. I'm just waiting for the capacitors and 2 extra XLR plugs.
I don't have the information to hand at present, however it related to values of resistors around the duplex hybrid, the audio levels were too high to effectively work. I was actually pointed in the right direction by a fellow tinkering buff in Sydney, Australia.
I have since made up several for my daughters school as they did not have a budget to extend to Clearcom and they are kicking along quite happily ever since.
If you want some further details, email me off this board and I shall drag the specific details out for you
Yeah i do want the details, are you saying you increased the resistor levels so that full duplex works? If so, can you pull up the specifics, I'm not great with this kind of electrical engineering, I was hoping to just put it together off someone else's plans, I can do that much without problems. And i don't really want to waste my own money, because I'm paying for it and donating it to hte school.