JD
Well-Known Member
Personally I objected to the use of the Camloc Splitter/Spider Box at all, and questioned why we couldn't just pass-thru the PDs, but it wasn't my call.
Yea, rack looping is how my old systems were set up. As long as every component in the power chain exceeds the ratings of the main disconnect, it makes for a much cleaner setup. Now, this was back in the 80s but as far as I know this would still be true today. I used three EDI hernia racks (I think they were about 400 pounds each, but my back might be exaggerating ) Each had 5 male and 5 female cams.
and I measured only 1.5A max. on the neutral. If you think I'm pulling TWO pieces of 100' 4/0 to carry 1.5A...well....
1.5 amps? Well, I guess I'll let you off the hook on that one