Levers make things easy. Without these, it would have been a real pain in the ass to do this a bunch of times:
It's kind of hard to see in this 2nd photo, but the big white wire is connected to a big red wire in the upper left:
The load is spread out on 6 fuses for this single power supply that has 2 pairs of 24VDC output wires. The small black wires are actually the positives coming from the LED strips. The little white wire powers the DMX decoder board, and the big black wires (negatives) and the big colored wires (PWM'd negatives) also connect to the DMX decoder.
It's kind of hard to see in this 2nd photo, but the big white wire is connected to a big red wire in the upper left:
The load is spread out on 6 fuses for this single power supply that has 2 pairs of 24VDC output wires. The small black wires are actually the positives coming from the LED strips. The little white wire powers the DMX decoder board, and the big black wires (negatives) and the big colored wires (PWM'd negatives) also connect to the DMX decoder.