This month I did a project wit this:
https://www.superbrightleds.com/mor...000k-3500k-4000k-5000k-6500k+color-Warm~2700K
Was amazing as a sheet to
lay out on a 30" disc in avoiding
bolt mouting holes. Concept great but we had problems. Necessary two circuits for split in powering them up. There was a short somewhere. Cut the circuits in half and one worked fine, the other did not. M
We installed the
LED to reflective alumiun diebond material which is conductive. After insulating the tape about all bolts mounting the diebond plate, still a short to
ground.
These sheets it was finally found, have an adhesive back yes... but it's not as insulating as a 3M VHB tape used on normal
LED tape. Any scratch of the sheet of
LED tape on it's backing could cause a short if an aluminum refector it is stuck to. Specific short we were not able to isolate, but every cut away part from
bolt mounting holes for the plate were taped for isolation.
In the end... worked out for the
color temperature want, perfect. And no, I didn't take photos. My staff does that for their own records and or resume. But this product is really cool as with COB
LED tape I am using more and more of. Saw the COB drum for Chicago Bulls Red lines in storage the day before last while with marketing manager.. They loved the results, I replied COB
LED tape is one of the best advances in
LED tape in the last five years. COB
LED tape is with sheets of
LED what I'm working on more.
After a controller for
LED 3-channel dissappointment for a DJ table for control. Was called about it today in how to program this DJ table.... we know that our hopes that this
system would do what we wanted.... but it basically sucks. Really sucks in doing
LED... Additive to what is already programmed instead of Last takes presidence, amongst other.. got 8 channels and three
RGB circuits... No it in controller does not work that user friendly.
My Co-Crew Chief is looking at this
point into cheap control systems which are I-Phone/
etc;. tablet
etc.
etc. controllers with just slightly enough memory so as to just do a light board on some tablet
system for our
LED's. Interesting concept as various I-Phone/
etc as said types of tablets with limited to what we need comes down in price, so does the controllers in matching it.
LED tape and controll is changing a lot. Last week I will have never considered buying some form of
cell phone or tablet so as to control
LED lights on a DJ table. Given costs... control for now is outstepping my more analoguge type of concept of control.