Jay Ashworth
Well-Known Member
I'm feeding Aux 1 to a modulator that drives our backstage monitor, and that's been working ok.
But for this new show, I need stage monitors, and when I tried to patch 2 and/or 3 to the stage amp through the snake returns, I had all kinds of whacky problems: hum, noise, "unplug the plug and bridge tip and ring with my finger and audio comes out the speaker, even though I'm not touching anything else", and the aux masters don't actually seem to *cut* anything; turn them to infinity-cut, and there's still sound.
Fried aux board in the mixer?
Everything else I've touched seems to work perfectly.
Tried the PFL switch in both directions, no change.
But for this new show, I need stage monitors, and when I tried to patch 2 and/or 3 to the stage amp through the snake returns, I had all kinds of whacky problems: hum, noise, "unplug the plug and bridge tip and ring with my finger and audio comes out the speaker, even though I'm not touching anything else", and the aux masters don't actually seem to *cut* anything; turn them to infinity-cut, and there's still sound.
Fried aux board in the mixer?
Everything else I've touched seems to work perfectly.
Tried the PFL switch in both directions, no change.