H.K.Walker
New Member
Sorry if this is the wrong prefix or thread, but I'm having a bit of trouble with a Chauvet obey 40 unit and I was hoping someone here might have some insight. To preface this I'm a high school student and I have been assigned to set up lighting for an upcoming show and the lighting system on our stage consists of Six LED light bars (unsure of model) and Five (previously six but there was an issue with one so they just re-linked the other 5 together) par lights (also unsure of model) all chained together and linked to a Chauvet obey 40. The issue is that no matter what I do I cannot get the pars to come on, Fixtures 7 through 12 are addressed to the overhead light bars so I assume 1 through 6 would be the pars in question (with one of them being blank due to the sixth par being removed) but no matter what i select or change nothing works. I have tried resetting the board with no luck and the only suggestion i found online was to take down all the lights and try hooking them up individually but I am unable to do that due all of the wiring for the lights being run in the ceiling. I know this isn't a lot to work with but I would greatly appreciate any insight into this issue. Thanks in advance.