patrickh
Member
Hello,
I am currently working on a rig with about 40 Apollo Smart Color PRO's being controlled by an ion. The scrollers are jerking when not in the open frame. All of them are doing it with some doing it worse (to the extent of jerking all the way into the previous frame). I have noticed that the jerking gets worse when you are approaching the end of the scroll farthest away from home. We calibrated all of the scrollers on the ion and I think this may be the problem. How do you clear calibration from the scroller? Any other ideas as to the cause? All DMX runs do not exceed 50 feet from the node or opto splitters. We are using Apollo power supplies. All runs are terminated. Help me out CB!
Thanks in advance!
Patrick
I am currently working on a rig with about 40 Apollo Smart Color PRO's being controlled by an ion. The scrollers are jerking when not in the open frame. All of them are doing it with some doing it worse (to the extent of jerking all the way into the previous frame). I have noticed that the jerking gets worse when you are approaching the end of the scroll farthest away from home. We calibrated all of the scrollers on the ion and I think this may be the problem. How do you clear calibration from the scroller? Any other ideas as to the cause? All DMX runs do not exceed 50 feet from the node or opto splitters. We are using Apollo power supplies. All runs are terminated. Help me out CB!
Thanks in advance!
Patrick