Hi,
Does anyone know where I can buy a single lighting fixture that would come down from a winch and be removed. The lighting fixture would be used for the main ring lighting (22'x22') and it would be nice to control the fixture (dmx/dimmable).
A little back ground... I was hired to provide some movers and sound in a new venue which will not allow a permanent fixture (but will have conduit installed for a light/winch, which is to be removed after each event...leaving the winch to raise the fixture the next time (without the use of a lift ...ceiling is 40'). I need to know what light/winch would work (and what is done with the ac supply for fixture when light is raised or lowered).
Like I said I am doing PA/entertainment lighting and the promoters which are supplying the main ring lighting asked me to help find a fixture.
They are looking at :
Granger
Electric Winch, Single Line Pull Capacity 1000 Pounds, Single Line Vertical Lift Capacity 1000 Pounds, Double Line Pull Capacity 2000 Pounds, Gearing Type Planetary, Full Load Current 10 Amps, Full Load Empty Reel Line Speed 13.0 FPM, Full Load Full Reel Line Speed 24.0 FPM, Gear Ratio 148:1, No Load Empty Reel 21, No Load Full Reel 38.9, Power Source 115 VAC, Rope Size 45 x 5/32 Inches, Length 13 1/2 Inches, Height 5 3/4 Inches, Width 5 3/8 Inches, 6 Feet Cord Grainger Item # 5W659
Price (ea.) $466.50
Brand DAYTON
Mfr. Model # 5W659
High Bay Fixtures, Metal Halide, Lamp Watts 1000, Total Input Watts 1080, Volts 480, Space to Mtg Height Ratio 0.9, Socket Type EX39 Protected Mogul, Fixture Type High Intensity Discharge, Reflector Type Open, Ambient Temp Max 55/132 C/F, Borosilicate Glass Reflector, Min Mounting Height 20 Ft, White Polyester-Powder Finish, Suggested Lamp Stock No 5XP29, Height 28 In, Width 18 In Grainger Item # 7G158
Brand LITHONIA
Mfr. Model # TPG 1000MP PG21 C21 480
This is what they are going with if nothing else can be found!
If anyone has any other suggestions that would be great!!!
Thanks
Ed
Does anyone know where I can buy a single lighting fixture that would come down from a winch and be removed. The lighting fixture would be used for the main ring lighting (22'x22') and it would be nice to control the fixture (dmx/dimmable).
A little back ground... I was hired to provide some movers and sound in a new venue which will not allow a permanent fixture (but will have conduit installed for a light/winch, which is to be removed after each event...leaving the winch to raise the fixture the next time (without the use of a lift ...ceiling is 40'). I need to know what light/winch would work (and what is done with the ac supply for fixture when light is raised or lowered).
Like I said I am doing PA/entertainment lighting and the promoters which are supplying the main ring lighting asked me to help find a fixture.
They are looking at :
Granger
Electric Winch, Single Line Pull Capacity 1000 Pounds, Single Line Vertical Lift Capacity 1000 Pounds, Double Line Pull Capacity 2000 Pounds, Gearing Type Planetary, Full Load Current 10 Amps, Full Load Empty Reel Line Speed 13.0 FPM, Full Load Full Reel Line Speed 24.0 FPM, Gear Ratio 148:1, No Load Empty Reel 21, No Load Full Reel 38.9, Power Source 115 VAC, Rope Size 45 x 5/32 Inches, Length 13 1/2 Inches, Height 5 3/4 Inches, Width 5 3/8 Inches, 6 Feet Cord Grainger Item # 5W659
Price (ea.) $466.50
Brand DAYTON
Mfr. Model # 5W659
High Bay Fixtures, Metal Halide, Lamp Watts 1000, Total Input Watts 1080, Volts 480, Space to Mtg Height Ratio 0.9, Socket Type EX39 Protected Mogul, Fixture Type High Intensity Discharge, Reflector Type Open, Ambient Temp Max 55/132 C/F, Borosilicate Glass Reflector, Min Mounting Height 20 Ft, White Polyester-Powder Finish, Suggested Lamp Stock No 5XP29, Height 28 In, Width 18 In Grainger Item # 7G158
Brand LITHONIA
Mfr. Model # TPG 1000MP PG21 C21 480
This is what they are going with if nothing else can be found!
If anyone has any other suggestions that would be great!!!
Thanks
Ed