Good Morning Brett
If the display says " A001" or maybe "D001" your good to go. Most fixtures come set to 001 out of the box.
Do not use
MICROPHONE cable. Its not the same as DATA cable.
As JD said,
page 11 tells you how to change the fixtures
DMX address.
Push the MODE
button until you see "SdAd" ( set
DMX address ), Sometimes using UP , DOWN works to scroll
thru menu's
ENTER, UP or DOWN until you get the
address you need, then ENTER.
Repeat for the other fixtures if any. ( I see you only have 1 )
Now for the
console.
Read the
book
http://www.chauvetlighting.com/products/manuals/Obey_10_UM_Rev3_WO.pdf
sit down with the
console &
fixture &
play
Page 6 is for
fixture addressing / you should have done this already.
Page 8 starts you PROGRAMING your scenes
page 10 is playback
Your dealer should be able to help you with questens. If not or you
purchase on
line call me at my shop.
Good Luck Have FUN