We have a Express 48/96 that is currently set up as a single scene board. The first 48 channels are controlling the ETC dimmers, of which only dimmers 1-41 are used/wired out. But about 10 of the dimmers (in this range) are not used.
The second 48 are currently assign for the few intellegent (DMX) units we have.
The DMX units are set in the following plan: (all RGB fixtures)
-Upstage left
-Upstage right
-Downstage left
-Downstage right
-Stage facia
-House Walls
I like to program my cues for each service weekend. But because of the non technical people we have running the board, I am thinking of setting it up for two scenes. Scene one worship, scene two Service. This way they set what they feel they need for each and the cross fade.
Typically we use the same, yawn, settings week to week except for wall color.
Thoughts?
The second 48 are currently assign for the few intellegent (DMX) units we have.
The DMX units are set in the following plan: (all RGB fixtures)
-Upstage left
-Upstage right
-Downstage left
-Downstage right
-Stage facia
-House Walls
I like to program my cues for each service weekend. But because of the non technical people we have running the board, I am thinking of setting it up for two scenes. Scene one worship, scene two Service. This way they set what they feel they need for each and the cross fade.
Typically we use the same, yawn, settings week to week except for wall color.
Thoughts?