I'm looking to upgrade some of my amps from XTI 4000 to ether Crown Macro Tech's or Macro Tech I's.
I have 2 Yamaha SW218V subs now but will be upgrading to 4 EAW FR250z. I would like to run all 4 of the EAW's off of one amp. Below are the specs for the EAW's
Frequency Response (1 W @ 1m) ±3 dB 40 to 2100 Hz
-10 dB 33 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m) 101
Impedance (Ohms) 4
Power Handling, AES Standard (Watts) 1000
Calculated Maximum Output (dB SPL) Peak 137.0
Long Term 131.0
Recommended High-Pass Frequency 24 dB/Octave 35Hz
I was going to go with Macro Techs but I took a look at the Macro Tech I's and now I'm not sure what I want. If there is someone out there that has used them both and can give me your thoughts on pros and cons of both that would be awesome.
I have 2 Yamaha SW218V subs now but will be upgrading to 4 EAW FR250z. I would like to run all 4 of the EAW's off of one amp. Below are the specs for the EAW's
Frequency Response (1 W @ 1m) ±3 dB 40 to 2100 Hz
-10 dB 33 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m) 101
Impedance (Ohms) 4
Power Handling, AES Standard (Watts) 1000
Calculated Maximum Output (dB SPL) Peak 137.0
Long Term 131.0
Recommended High-Pass Frequency 24 dB/Octave 35Hz
I was going to go with Macro Techs but I took a look at the Macro Tech I's and now I'm not sure what I want. If there is someone out there that has used them both and can give me your thoughts on pros and cons of both that would be awesome.