Howdy y'all,
I've joined the community in hopes that someone might have some insight into Proxima 9290 diagnostics.
I have a previously working 9290 from work (we replaced this with a quieter model).
Now that I have it home, I don't see any sign of life: not indicator light, no lamp warming up, no fans spinning, nothing.
When I connect my laptop using VGA (the only connector I've tested), Windows 7 sees the projector.
Per the manual, I connect VGA before connecting the AC.
I used my multimeter and checked one connection on the power supply board and I get 120V AC.
I've pressed the reset button on the back a few times, but no go.
I've removed and reseated the bulb twice, nothing.
I even powered it on without the bulb, but no change (ie: no indicator lights).
Any suggestions short of call a tech?
I've joined the community in hopes that someone might have some insight into Proxima 9290 diagnostics.
I have a previously working 9290 from work (we replaced this with a quieter model).
Now that I have it home, I don't see any sign of life: not indicator light, no lamp warming up, no fans spinning, nothing.
When I connect my laptop using VGA (the only connector I've tested), Windows 7 sees the projector.
Per the manual, I connect VGA before connecting the AC.
I used my multimeter and checked one connection on the power supply board and I get 120V AC.
I've pressed the reset button on the back a few times, but no go.
I've removed and reseated the bulb twice, nothing.
I even powered it on without the bulb, but no change (ie: no indicator lights).
Any suggestions short of call a tech?