The radiance can be finiky with its dip switch settings at times. I have had issues where it won't go into manual mode (dipswitch settings 899) until I powers cycled it once or twice.
The dipswitchs are also really prone to getting bumped. I would check those as well.
Good job, Jack. By the way, typing "Ultratec Radiance Hazer" into Google gets Jack's link as the very first result. I'm not sure what you were doing on "the web" to get nothing but 404 errors. Maybe you forgot to pay your internet bill.
Good job, Jack. By the way, typing "Ultratec Radiance Hazer" into Google gets Jack's link as the very first result. I'm not sure what you were doing on "the web" to get nothing but 404 errors. Maybe you forgot to pay your internet bill.
Having issues with our Radiance Hazer. It's less than a year old and has maybe five weeks of use on it...
The LEDs will not light in stand-alone mode or DMX mode. DMX passes through fine.
Both fuses are fine. Switch lights. No internal wiring unterminated. Took it apart, cleaned and replaced gasket. Reassembled with no issues. Still nothing.
Anyone have any experience troubleshooting the Radiance? I have a concert the next two nights and sure could use it...