jnobel
Member
Hi all,
Wanted to get some thoughts on what best practise would be for raising 6 x 24' Truss Uprights safely and easily. They will be sitting on the upstage edge below an LX/drape line.
Trim is 24' for the uprights. Could be decreased by 2' or 4'. Drape/LX truss will be at around 28'/30'. All truss is 12" box truss.
Hung on each upright is 4 x Magic Panels at around 45 lbs. per fixture. They will be clamped to a pipe hung on the downstage face of the truss.
I've attached a front facing plot to this post.
My plan is just to raise the uprights with the drape line truss and then lower them onto their base plates. Are there any ideas other than this?
Thanks.
Wanted to get some thoughts on what best practise would be for raising 6 x 24' Truss Uprights safely and easily. They will be sitting on the upstage edge below an LX/drape line.
Trim is 24' for the uprights. Could be decreased by 2' or 4'. Drape/LX truss will be at around 28'/30'. All truss is 12" box truss.
Hung on each upright is 4 x Magic Panels at around 45 lbs. per fixture. They will be clamped to a pipe hung on the downstage face of the truss.
I've attached a front facing plot to this post.
My plan is just to raise the uprights with the drape line truss and then lower them onto their base plates. Are there any ideas other than this?
Thanks.