I have two Samson Resound HD10 PA cabinets with blown woofers. I would like to replace the woofer myself, but i'm not sure exactly what replacements to buy. If the cabinets total impedance is 8 Ohms, then should I buy an 8 Ohm woofer? Same for the power ratings, if the cabinet is rated for 150w RMS, then do I buy a replacement woofer that is rated for 150w RMS. I'll paste the original specs for the speaker below. I'd love to get specific recommendations if you have them!
-Alex
LF Driver Size 10"
HF Driver Size 1"
Power Rating (Program) 150W
Peak Power Capacity 300W
Impedance 8 Ohms
Frequency Range 60Hz-19khz
Crossover Frequency 2.5kHz
Maximum Peak SPL 116dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 60 Degrees
Enclosure Material MDF
Mounting Options Pole Mount, Floor Wedge
Inputs 1 x Speakon, 1 x TS
Outputs 1 x Speakon, 1 x TS
Height 24.4"
Width 17.44"
Depth 15.47"
Weight 29.5 lbs
Manufacturer Part Number SARS10HD
-Alex
LF Driver Size 10"
HF Driver Size 1"
Power Rating (Program) 150W
Peak Power Capacity 300W
Impedance 8 Ohms
Frequency Range 60Hz-19khz
Crossover Frequency 2.5kHz
Maximum Peak SPL 116dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 60 Degrees
Enclosure Material MDF
Mounting Options Pole Mount, Floor Wedge
Inputs 1 x Speakon, 1 x TS
Outputs 1 x Speakon, 1 x TS
Height 24.4"
Width 17.44"
Depth 15.47"
Weight 29.5 lbs
Manufacturer Part Number SARS10HD