Hey All,
Hoping someone here has had a bit more experience with the Sennheiser Net1 system to help me with an answer as searching the internet/going through Sennheiser's documentation hasn't given me an answer yet...
We have a number of G2 300 Series wireless systems, which we're looking to rack together with 16 or so receivers, 2 Net1s, antenna splitters, etc, etc.
The Net1 will do channel scanning for you, based on the channels stored in the banks of the receiver it uses to scan with. As the 300 series only has 8 channels per bank, the Net1 could only program 8 channels/receivers. The 500 series however can do 20 channels/bank.
If we include 1 x 500 series receiver in with 15 x 300 series, will it then program all the radios correctly? Or does the Net1 only send bank/channel combinations to each receiver when reprogramming, so the 300 series will be unable to look up the bank/channel table as given by the Net1???
Thanks for any info you can provide!
Hoping someone here has had a bit more experience with the Sennheiser Net1 system to help me with an answer as searching the internet/going through Sennheiser's documentation hasn't given me an answer yet...
We have a number of G2 300 Series wireless systems, which we're looking to rack together with 16 or so receivers, 2 Net1s, antenna splitters, etc, etc.
The Net1 will do channel scanning for you, based on the channels stored in the banks of the receiver it uses to scan with. As the 300 series only has 8 channels per bank, the Net1 could only program 8 channels/receivers. The 500 series however can do 20 channels/bank.
If we include 1 x 500 series receiver in with 15 x 300 series, will it then program all the radios correctly? Or does the Net1 only send bank/channel combinations to each receiver when reprogramming, so the 300 series will be unable to look up the bank/channel table as given by the Net1???
Thanks for any info you can provide!