Hi 'all. I have a Strand Series 300 lightboard with Lightpalette and Genius Pro installed. The problem is that th eboard constantly freezes up on me and when I tuen it off then back on, and whenever I turn it back on for that matter, it takes forever (two - 3 hours) for the dimmers to reach full capacity. If I have the dimmers programmed into a sub, then the sub works fine and the light go to full when asked to, but if trying to set levels with the console, no go or should I say, go slo! I can hit 15@FULL * and the lights will go to full, just the sliders don't work except on the control console. Any suggestions? I already had to have the control console repaired once. Thanks!!