Sony
Active Member
This isn't a new problem but I've just been dealing with it until now because it hasn't mattered.
So I've been using VectorWorks 2008 for the last year and I'm trying to print out my Plot for the latest show I'm doing which is The Women of Lockerbie. For some reason the line weights are so thin on Accessories like Scrollers and Moving Yokes that when it tries to print it out that it can't properly do it. It doesn't print them properly and lines are missing because they are so thin. I don't know whats wrong, up until now I've Exported to PDF at 300 DPI and printed the PDF file which has helped quite a bit but it's still screwy.
My Printer is a Espon Stylus Photo 1400 wide format printer and it can print up to 13"x19". It's resolution can be up to 5760x1440 DPI.
I've tried everything i can think of, including going into Print Options and jacking the resolution all the way up on the printer to Fine. All these things have helped...but nothing has completely solved the issues.
I've gotten to the point where it will print anything that is on a perfectly horizontal or vertical plane but will have difficulty printing anything that is at an angle.
I've attached a picture of the problem
As you can see...the moving yoke is missing a few lines and the scroller that is supposed to be on the fixture down and left of it is almost completely missing.
Thanks for your help guys!
So I've been using VectorWorks 2008 for the last year and I'm trying to print out my Plot for the latest show I'm doing which is The Women of Lockerbie. For some reason the line weights are so thin on Accessories like Scrollers and Moving Yokes that when it tries to print it out that it can't properly do it. It doesn't print them properly and lines are missing because they are so thin. I don't know whats wrong, up until now I've Exported to PDF at 300 DPI and printed the PDF file which has helped quite a bit but it's still screwy.
My Printer is a Espon Stylus Photo 1400 wide format printer and it can print up to 13"x19". It's resolution can be up to 5760x1440 DPI.
I've tried everything i can think of, including going into Print Options and jacking the resolution all the way up on the printer to Fine. All these things have helped...but nothing has completely solved the issues.
I've gotten to the point where it will print anything that is on a perfectly horizontal or vertical plane but will have difficulty printing anything that is at an angle.
I've attached a picture of the problem
As you can see...the moving yoke is missing a few lines and the scroller that is supposed to be on the fixture down and left of it is almost completely missing.
Thanks for your help guys!