Most don't seem like they are (more fuzzy ones are and the others probably not but could be with a coating but probably not) but bag and cut them all none the less with
plug. It's a
safety thing in doubful wiring also - would you
plug in and leave any of these on all night long while you sleep?
I would not cut beyond the
cord grip in removal but on the 8"
Fresnel, it is
asbestos in say noting "cords cut" leave it there in that the rest of the
asbestos cable inside the
fixture plus any dust from it is implied to be still there. That or cut at the lamp
socket the
asbestos all of it and be able to note
asbestos removed once vaccumed out well. "Un-Wired" might be appropriate for this.
Wouldn't go past the lamp
socket as it's probably solder welded wiring to it. Would be nice if cleaned but it is as it were as
asbestos removed. The other
fixture probably won't be soldered at the lamp
socket.
Nice fixtures, too bad I already have examples of both. Given the punch out holes, note what type of
socket is in the Century/
Strand Leko as I think possibly a G-9.5
bi-pin possible. Given the optics of this
Leko, it's still a viable up to
360Q viable
fixture. On the 8"
Fresnel... hard market, I prefer crank style but 8" Fresnels are mostly sold to them with bigger stages and they don't often think used when thinking of increasing inventory. If you can't sell it and sorry to say... it's
lens alone in standardized part and very expensive might be worth more than the
fixture if sold alone but I would try for the
fixture first in helping someone else with a new home for it/them.