Hopzing: The EOS family (and so I expect Nomad) will do EDMX which also goes by NET2. Upgrading is usually a good thing, but it seems not mandatory.
As per my conversation last Thurs with ETC tech support, Nomad will only talk sACN, thus is not comparable with Net2 devices that are only EDMX capable. You can update the 2 port nodes that were manufactured by Pathway for ETC, as well as CEM+ to enable sACN.
EDIT: As per a thread on the ETC forum, those legacy 2 port Net 2 nodes are upgradable via sACN software from Pathway, not ETC. As such ETC can't support a product using software from a separate vendor. I have not done this upgrade (and don't plan to do so), so can't comment on how well ,or if it works.
Sent from my iPad using Tapatalk
Last edited: