Brentgi
Active Member
I'm running ETC Element ver. 2.3.
I have a mixture of led fixtures that I work with.
The two fixtures in question on this post are both Chauvet fixtures:
Chauvet Colordash Batten
Chauvet Colorband Pix (USB)
Also, to preface, there is no profile for the Colorband Pix USB, so I had to create one. This may play into the issue.
The basic question is this: How do I calibrate the color for these fixtures?
If I give them both the same RGB values, then they match physically, but the color space on the Element shows them as different colors. If I use the color picker on both of the fixtures simultaneously, it sets the RGB values differently. This should not be, as the same RGB values for each fixture output the same physical color.
Can anyone steer me in the correct direction?
Thanks!
I have a mixture of led fixtures that I work with.
The two fixtures in question on this post are both Chauvet fixtures:
Chauvet Colordash Batten
Chauvet Colorband Pix (USB)
Also, to preface, there is no profile for the Colorband Pix USB, so I had to create one. This may play into the issue.
The basic question is this: How do I calibrate the color for these fixtures?
If I give them both the same RGB values, then they match physically, but the color space on the Element shows them as different colors. If I use the color picker on both of the fixtures simultaneously, it sets the RGB values differently. This should not be, as the same RGB values for each fixture output the same physical color.
Can anyone steer me in the correct direction?
Thanks!