Robert F Jarvis
Well-Known Member
Noticed that when we turned OFF the Element 2 console, after about 5 seconds a lamp (#80) would light up! I can 'Reset' the SENSOR 48 (96 channel) dimmer rack to turn it off. Or it will go after itself after about 10/15 minutes.
Checked no "Backup" program in system and changed out the 79/80 dimmer module to no avail. To preclude 'errant' DMX signals during shut down I went into blackout and then unplugged the DMX cable to cut off any transmissions. The light still came on! According to this then I really think the problem is in the dimmer rack but not sure how to proceed. I'm in the theatre during the evening so it would difficult to talk to ETC while at the rack. Ideas?
Checked no "Backup" program in system and changed out the 79/80 dimmer module to no avail. To preclude 'errant' DMX signals during shut down I went into blackout and then unplugged the DMX cable to cut off any transmissions. The light still came on! According to this then I really think the problem is in the dimmer rack but not sure how to proceed. I'm in the theatre during the evening so it would difficult to talk to ETC while at the rack. Ideas?