It looks great!
What are the dimensions of the space and how many fixtures did it take?
@JonCarter and
@microstar , I hope this helps. The space is 110'x70'
Trim from
fixture to floor is 22' We used 34 fixtures. We intentionally did not put 4 fixtures in front of the
stage, nor 2 fixtures by the
thrust tech booth. All lights are aproximatly 14' apart and starting about 8' from the walls. You will notice the dark area in Elation's Photometric drawing, this was an intentional design so as not to
spill on the video
screen, and also saved the cost of a few fixtures. I also included the rigging
layout.
Control is 1
universe with fixtures set to 17 ch extended mode ( yes the back row has 4 fixtures on the same
address. ) They are controlled from out vista
console services / events and also by
ETC Echo touch pads for general use. Echo needed to be
in one universe. Routing is through a
Ethernet to a 4 port
node. Then the lights are split into 4
dmx daisy runs. Therefore each
fixture can be individually controlled.
We just finished the hang so I don't have light
meter reading at the floor, but I can tell you that we will only be running them at about 75% as they are bright with all colors and lime plus white in the mix.
I have attached some
snap shots of the prints that should help. ( I haven't ask for permission to share the full prints)