Not sure if this is possible to do, but here's what we're wondering: We're running into a lot of quick plot re-hangs where fixtures are moving around between any of 9 universes frequently. We're trying to see if there's a way to have the Console or Concert automatically reassign fixture DMX addresses in each universe via RDM, based on current fixture personality - Rather than doing it fixture by fixture either on the unit or via Concert. Then we'll patch via the RDM device list on the console. The fixtures are a mix of ETC S4LED2/D40 Lustr.
The system is a full ETC house install, Ion Xe console, Net3 Concert controller, various RDM enabled gateways. RDM appears to function fine throughout the system.
If it's not possible, it's not the worst to have to do it in a Concert spreadsheet view, but if this can automate it would save us a bit of changeover work.
The system is a full ETC house install, Ion Xe console, Net3 Concert controller, various RDM enabled gateways. RDM appears to function fine throughout the system.
If it's not possible, it's not the worst to have to do it in a Concert spreadsheet view, but if this can automate it would save us a bit of changeover work.