carsonld
Active Member
I am almost positive that I am overlooking the information I need... But am going to ask anyways.
I am beginning the process of replacing our system with LED fixtures. The first part of this project is replacing our seven cyc fixtures with the ColorSource CYC. Ideally what this project will look like is power will come in from a circuit on the electric raceway and then sent to the ColorSource Relay. Data will be sent from the catwalk and into the ColorSource Relay. Here are my questions...
What dimmer should I be looking at to replace the stage pin circuit on 3rd electric?
How many fixtures can each relay handle? At some point we will have 5 CS pars and 14 CS spots on each electric. Im assuming I will need a new relay for each "system". Is the CS Relay the best way to go for this?
Anyone had luck with their wireless DMX relays? Im worried running roughly 67 fixtures all through wireless DMX. I figured I would have some sort of wireless/wired hybrid. Such as having the electrics all wired relays and the box booms and grid being wireless.... Point is, what are y'all thoughts? I just feel there is more room for error.
Also, I am running NET 2 in the space.
Last two question... This doesn't pertain to the CS but I have twelve cheap LED flood lights on our worklight circuits. How can I get the dimmer to automatically turn them on when its level is set to 1%?
Anyone have pric
Thanks guys!
I am beginning the process of replacing our system with LED fixtures. The first part of this project is replacing our seven cyc fixtures with the ColorSource CYC. Ideally what this project will look like is power will come in from a circuit on the electric raceway and then sent to the ColorSource Relay. Data will be sent from the catwalk and into the ColorSource Relay. Here are my questions...
What dimmer should I be looking at to replace the stage pin circuit on 3rd electric?
How many fixtures can each relay handle? At some point we will have 5 CS pars and 14 CS spots on each electric. Im assuming I will need a new relay for each "system". Is the CS Relay the best way to go for this?
Anyone had luck with their wireless DMX relays? Im worried running roughly 67 fixtures all through wireless DMX. I figured I would have some sort of wireless/wired hybrid. Such as having the electrics all wired relays and the box booms and grid being wireless.... Point is, what are y'all thoughts? I just feel there is more room for error.
Also, I am running NET 2 in the space.
Last two question... This doesn't pertain to the CS but I have twelve cheap LED flood lights on our worklight circuits. How can I get the dimmer to automatically turn them on when its level is set to 1%?
Anyone have pric
Thanks guys!
Last edited: