Hi all, sorry for disappearing, we have a built in
dimmer rack from Electronics Diversified,
Theatre Switchboard "
MARK" Series. So, maybe an
ETC precursor? It does have clean
power. It might be too warm in there but it's not a sauna.
It probably does need to be vacuumed, our
hvac is a joke.
What we have done is to add the terminators to all the lines that didn't have any (except for opening the
dimmer rack since we're not pros). We also swapped the two
dmx inputs into the board so the one that had been in dimmers 1-512 is now in the one for dimmers 513-1024 and vice versa. At some
point we'd assigned them both to dimmers 1-512 using the first for dimmers 1-96 and the second for dimmers 97-171 (we had new
LED fixtures not running through the
dimmer room). So for whatever reason it is working now. No flashing, all behaving appropriately. The thing that still has us scratching our heads is that the board worked normally with a different
dimmer rack in the black box. But at least it is working now in the
theatre where we need it.