The above Ad will no longer appear after you Sign Up for Free!

Paradigm to EntTec

Discussion in 'Lighting and Electrics' started by David Smith, Jan 11, 2017.

  1. David Smith

    David Smith New Member

    Messages:
    1
    Likes Received:
    0
    Location:
    Ellicott City, MD
    Does anyone have experience with setting up Paradigm to control the output on an EntTec E-Streamer?
     
  2. DaveySimps

    DaveySimps CBMod CB Mods Premium Member

    Messages:
    2,809
    Likes Received:
    220
    Location:
    Marine City, MI
    Relocating this thread to the Lighting Forum so it is posted in the correct place. You should get better traffic there. Not all members make a point to regularly stop by the New Member Board.

    Welcome to CB, David! When you get a moment, please go back to the New Member Board and take a second to introduce yourself to the group.

    ~Dave
     
  3. RickR

    RickR Well-Known Member

    Messages:
    955
    Likes Received:
    144
    Occupation:
    Consultant
    Location:
    Spokane, WA the great "Inland Northwest"
    I've done a moderate bit of Paradigm work, but not with a E-streamer. From the looks of the manual you have quite a list of communications methods.

    Relevant questions concern your goals. Exactly what kind of control do you want? Direct DMX/ArtNet gives simple stuff on a fader. Paradigm does RS232/UDP very easily but you have to supply the logic. Simple start/stop buttons? Show selection and recording gets trickier.
     
  4. Malabaristo

    Malabaristo Active Member

    Messages:
    106
    Likes Received:
    25
    Location:
    Wisconsin
    Do you have access to ETC's Light Designer software? This is typically a technician tool, but you can also purchase training for it as an end-user (software is technically free, but in order to get it you have to be trained). If you don't have it, then you will need help from an ETC certified tech in order to make changes to your Paradigm configuration.
     

Share This Page