VL770 Spot and VL2500 Wash

Turn the fixture over? There's a sensor inside that automatically orients the display. I believe the VL2000 series had an override deep in the set-up menu; not sure about the VL770s.
 
If the display flip override is on, hit the up & down buttons at the same time to flip the display.
 
Depending on the age of the VL2000s, they might not auto flip the display. The reason is the old sensors used were mercury based and Vari*Lite had to get rid of them to comply with RoHS.
 

Users who are viewing this thread

Back