Hi folks,
I'm hoping someone has had the same problem and can point me in the right direction.
I have a Chauvet Legend 412 on which the LEDs will not light, or for lack of a better term it will not "lamp on". It responds to data and will pan, tilt and send data down the line.
So far I've pulled it apart, cleaned all the connections, checked capacitors and looked for anything obviously wrong.
I also have a QWash 560Z LED with a similar problem, so I suspect this is caused by a Chauvet design flaw or is common among Chauvet fixtures.
Any insight or advice appreciated!
Many thanks.
I'm hoping someone has had the same problem and can point me in the right direction.
I have a Chauvet Legend 412 on which the LEDs will not light, or for lack of a better term it will not "lamp on". It responds to data and will pan, tilt and send data down the line.
So far I've pulled it apart, cleaned all the connections, checked capacitors and looked for anything obviously wrong.
I also have a QWash 560Z LED with a similar problem, so I suspect this is caused by a Chauvet design flaw or is common among Chauvet fixtures.
Any insight or advice appreciated!
Many thanks.