Yes I have in my local area theater which happens to own all colortran fixtures for the main theaters and Strand SLs for a smaller theater. Pattern wise they will be sharp focused when you want them sharp and gobos do not need any special adapters to appear or actually be in sharp focus on that type of fixture, trust this, one show that I went in to help with load in, 10 Gobos were used in colortran 5/50s and all projected patterns crisp and clearlyzackw250 said:
Colortrans Also have something similar to a Strand SL or ETC Source 4 lamp centering/ Peak-Flat knob... As for the Burning gobo... something is wrong in that fixture.. no Enchanced Ellipsoidal should turn any Gobo Bright orangepropmonkey said:it has that but i want to be able to focus it. our other coves lights are strands and those you can move the lamp foward or back.
The first modification is that the lamp is actually too far into the reflector. If you remove the lamp holder you will see there are for aluminium plates between the lamp housing and the lamp holder. You can remove two of these and you will find the light intensity increases and is more even. The second modification is to remove the lens tube and check the diameter of the shutter gate opening. If it is three inches it is too big. You need to disassemble the shutter assembly and make one replacement palte from 22 guage steel sheet. The centre hole should be 2.5 inches in diameter. Reassemble the shutter assembly an re-install.
We use essential cookies to make this site work, and optional cookies to enhance your experience.