LED House Lights Not dimming

Mac Hosehead

Well-Known Member
Joined
Sep 10, 2014
Location
Shark Tank
If the LED house lights have 0-10V control then how is this being generated? An interface is required. The power for the LEDs should be constant.
 

RickR

Well-Known Member
Joined
Sep 18, 2009
Location
Spokane, WA the great "Inland Northwest"
Take a look around for stuff besides the Sensor rack. If the system has other ETC parts there might be a Unison DRd-6 or 12 module rack (shorter than a Sensor, but holds dimmers) OR a DMX to 0-10V converter/gateway, probably in a 12x12 box that nobody pays any attention. If all you have is Sensor racks you have a major miscommunication somewhere.
 

BillConnerFASTC

Well-Known Member
Joined
Jan 30, 2010
Location
Clayton NY 13624
You might try calling ETC tech support. They might be able to tell you if someone bought the 0-10 gateway necessary. Best if you could have someone look at it. A nearby ETC dealer (Vincent?) or perhaps the rep (Crosslight?) who probably did get a commission on the sale could probably stop in and perhaps diagnosed problem.

Any sense if there is low voltage wiring to each fixture? That's one clue. Maybe ask whomever installed the retrofit fixtures.
 

Users who are viewing this thread