So due to our high school's auditorium not being done, our fall play has to be done in our Town Hall... I looked at their tech equipment and they have two LD-2400 dimmer racks and a LP-255 light board. These are both a 0-10V analog system... For lights they only have two rows of strip lights above the stage. They have 15 amp twistlock connectors to attach front lighting with on the balconies which are connected to the dimmers. I know we need to rent lights, but not sure of exactly what.
I was thinking about a least 4 Source 4, but wasn't sure of what degree lens to get. From the company we can get either 14, 19, 26, 36, or 50 degree lens. I also wasn't sure if a fresnel or a par can would be better suited.
I also was wondering what is the name of the wire to control the dimmers? I know it's a 8 pin Cinch-Jones connector, but I couldn't find any wires with them, just the connector.
The show is pretty basic for lighting and really just needs to light the stage.
These are photos from the pipe to attach lights on one side of the balcony. On each side of the balcony there are two vertical pipes about 5 feet apart. Each pipe has two twist lock connectors.
This is from about half way back on the ground to get a sense of the space.
I was thinking about a least 4 Source 4, but wasn't sure of what degree lens to get. From the company we can get either 14, 19, 26, 36, or 50 degree lens. I also wasn't sure if a fresnel or a par can would be better suited.
I also was wondering what is the name of the wire to control the dimmers? I know it's a 8 pin Cinch-Jones connector, but I couldn't find any wires with them, just the connector.
The show is pretty basic for lighting and really just needs to light the stage.
These are photos from the pipe to attach lights on one side of the balcony. On each side of the balcony there are two vertical pipes about 5 feet apart. Each pipe has two twist lock connectors.
This is from about half way back on the ground to get a sense of the space.