Ok, here is my dilemma.. I am used to using brass or steel gobos with the leko and this is the first time I am using a black and white glass gobo in the leko light.. And of course I had to put a tiny fine little dental floss thin scratch in part of the design right off the bat...
So I am wondering is there any thing I can do to fix this.. It appears to me that I might be able to use some type of ink and draw over this thin line.. Like maybe india ink? Or some type of paint.. or even a tiny piece of tape..
The main concern is that with a 750 watt bulb any of this might melt and then drip all over the rest of the design? Just a thought I had..
Looking forward to any advice on this and thank you in advance..
-Daniel
So I am wondering is there any thing I can do to fix this.. It appears to me that I might be able to use some type of ink and draw over this thin line.. Like maybe india ink? Or some type of paint.. or even a tiny piece of tape..
The main concern is that with a 750 watt bulb any of this might melt and then drip all over the rest of the design? Just a thought I had..
Looking forward to any advice on this and thank you in advance..
-Daniel