I just received 2 New 115-Crossfire fixtures by StageApe from Cheaplights.com (LED Effects @StageApe.com). I know, I know, but they were cheap. The insructions that came with the fixtures are horrible and of course no one at Cheaplights can help. Additionally, the instuctions don't seem to match what is listed on StageApe's site. The fixtures I received appears to be 4 channel (not 7 or 13 as noted @ StageApe.com). All I need to do is...
1. Set the DMX Address (I know 10 needs to be "ON" but when I set the address, e.g., 60 I get random light patterns.
2. Understand if this is really a 4-Channel Fixture.
3. Figure out where LAMP "ON" and "OFF" are located. At this point I don't care what the lights do as long as they respond to a "Black Out" command.
See the attached 1 Page Manual I received with the Fixtures. It's a good laugh at least.
I have setup many profiles for fixtures before but this one has me stumped. I have looked at other products that are simular like the REVO Xpress but have had no success. I use Freestyler.
Thanks, Greg
1. Set the DMX Address (I know 10 needs to be "ON" but when I set the address, e.g., 60 I get random light patterns.
2. Understand if this is really a 4-Channel Fixture.
3. Figure out where LAMP "ON" and "OFF" are located. At this point I don't care what the lights do as long as they respond to a "Black Out" command.
See the attached 1 Page Manual I received with the Fixtures. It's a good laugh at least.
I have setup many profiles for fixtures before but this one has me stumped. I have looked at other products that are simular like the REVO Xpress but have had no success. I use Freestyler.
Thanks, Greg