Black light provides very limited visible light you can work under, makes things with phosphoress content glow which can very much make the backstage have a glow to it that can be seen during blackouts, and will give some headaches over time. I would tend to avoid using black light lamps. On the other
hand, just as there is black light and more commonly found black light blue lamps, there is also blue phosphor coated lamps that are not giving out light in the
blacklight spectrum. Anywhere from a compact
fluorescent lamp in blue, red
etc, to a normal
fluorescent in colors. Same with lamps, black light
incandescent lamps are available in 60 and 75w, but the amount of visible useful light from them is minute. For instance, you would not be able to see the legs
masking the back
stage off the light of a black light. This would be counter productive as part of the purpose in back
stage lighting is in ensuring people are not shaking the legs when they bump them. They need to see the
leg in order not to bump it, black absorbs and definately does not reflect black light.
Any
fixture you have can light a
wing. Security lights - the double ended lamp
halogen fixtures designed to light up a wide area such as around a pool would work well in that you can go down to a 50w lamp installed in them. Similar yellow work lights when adapted to hang from a lighting pipe would also work with similar lamps. Problem with both fixtures is the glass in them is
safety glass which is good but also fragile. If the glass breaks it's going to shower down hot glass everywhere. You need to use any screens provided with the
fixture or introduce your own. Such fixtures however given a small wattage lamp are very easy to install
gel into the frame with the
lens. Such fixtures between security lights perminantly mounted, and work lights that are more
portable will also be cheap to get and once lamped down to a useful wattage would have the proper
intensity and a very good and direct beam spread. L&E makes a very nice work light like
fixture that is
UL listed for
stage usage. Unfortunately the lowest wattage of lamp you can install in it is 400
Watt so it's use as a run light would be limited. Old
cyc lights on the other
hand can be useful when lamped down. Old fixtures in general such as 4.1/2" Plano
Convex fixtures or
ground rows can be useful. Rope light when dimmed very low is also a good option.
Should there be too much coverage on
stage fixtures you have that are extra, for instance on a
Fresnel, you can remove the
lens and even
reflector. On the security light removal of the
reflector should cut down on the amount of light coming out of it also, dimming such a thing would be a better solution however.
Clip lights with taped on
gel work but are a pain, it's cheaper and easier to just use colored lamps in them. Try to avoid transparent blue "party bulbs" as they are much less effective than a true dipped colored lamp. Wattages range from 7.1/2 to 100w, I find 25w and 40w to be most useful. Clip lights are quick, cheap and easy to install and are frequently used. Should you be installing a perminant lighting
system however I would install the back
stage lights on a
circuit to ensure that when you go home at night they are all found and turned off. Otherwise it's necessary to turn off each
fixture. It can also be required by code that if it's perminant it needs to have perminant wiring and circuiting to it. Clip lights might be fine for a show, but the major lighting back
stage should be perminant and only supplemented by clip or
portable lights.
Index lights over the pin
rail system are useful for this for instance as one type of light. Get them in two circuits, one for working on the
rail, the other for shows. Such fixtures are much like a
cyc light except that the beam of light is much more directional.
Par fixtures would also work well if you have extras, but you might have trouble getting some that are low enough in wattage if colored. On the other
hand, if you have spare
par fixtures about than you can
gel them as needed. Again, the lowest wattage lamp possible for visibility but little
spill would be good. A wide focus
PAR can could do this. The wider the
lens in size on a
par, the wider the dispersion will be at it's start. You might have a MR-16 lamp with a 36 degree beam spread, even one with a fifty degree beam spread, but the overall beam is going to be less than that of a
PAR 30 to 64 lamp with say a 24 degree beam spread where
intensity and area covered is concerned. A
birdie as the MR-16 can is called might be good for confined spaces, but it's overall illumination would be very limited even at higher wattages. 36 degrees off a 2"
lens and short
throw is less than 24 degrees off a
lens twice that size, and for the most part the wider
PAR lamps are just as available in wide focus for an even wider directional beam yet.
Halco used to and probably still makes
track lighting PAR fixtures in smaller size cans than normal fixtures.
Track lighting fixtures are very easy either to modify for
stage hang or
purchase stage haning adaptors for. This will with a wide
PAR 46 flood for instance allow a very short
throw distance and compact
fixture but necessitate dimming due to the wattage. On the other
hand a
PAR 30
fixture while available in lower wattages would not have as wide of a beam spread given the size of the lamp.
PAR 56 lamps you can also find in a 200
watt version.
PAR 30 would be the smallest lamp I would think for overall lighting that might be useful. they are available in down to 35 watts
halogen. Unfortunately the lowest wattage colored lamp in this size is 75 watts which is fairly bright.
PAR 30 and
PAR 38 lamps would be the lamps of choice given the wattage range available. Their beams are still more round instead of rectangular and even across the field I find to be more useful.
True Pinspots being a
mirror ball lamp with a
PAR 36 5.5-6.4v narrow beam 30w lamp on the other
hand as described have a wee
bit narrow of a beam. You can get even colored medium focus roundells and even wider focus lamps for them that will have wider beam spreads, but in general the life of a pinspot is very short in not making it an economical solution short of putting a 12w lamp in a 6.4v
transformer which would be tremendously long life but also very amber. The high output lamps are not very
shock or
voltage spike resistant however what ever the type.
On
PAR lamps, a
PAR 38
fixture might be the most usable. It's not going to have the wide and very refined rectangular
wash of a work or security light, much less a
stage lighting
fixture with or without
lens, but it would still be a good solution. In this case you can get silicone coated for
safety, blue
watt miser lamps in 85w which might be just a little more light than you need without a
dimmer. Could be useful for the first dress to have the lamps up a
bit more without needing the work lights on, and this lamps 60 degree
beam angle would make it decent for close projection. Otherwise
PAR 38 lamps are available in down to 45 watts. Given the wide
lens in addition to
beam angle idea, a
PAR 38 would probably be a good solution especially if it's silicone coated to catch the glass. This is something any other
fixture would not be able to do as well in lower wattages.
On the other
hand, for best results, you might be best off looking into a low
voltage system, this way if you have fixtures strung out where ever and cords all about, there is no chance of sparks in the dark.
Track lighting can be installed either on
portable bars or on individual pipe hanging clamps and sockets in addition to perminantly installed on the walls. Transformers can be remote for the wiring - at it's own distribution
system or at the
plug to be low
voltage in the
cord. In the case of a low
voltage system, I would not be opposed to
gaff taping the
cord to the
deck without any protection over it. Otherwise such fixtures on perminantly installed bars could be easily focused to where you need them. There are for instance little three inch square
wash light fixtures available giving off a rectangular beam as opposed to the commonly known round little MR-8 to MR-16 lamps most known. You can also get such
track lighting if perminantly installed as
line 120v or low
voltage with shutters to mask the beam where you need to. Such lamps can be as simple as a clip in light
bulb to a wall
socket at about three watts to a 250w
wash fixture with barn doors. Both
line and low
voltage track lighting would be a good solution for perminant install.
Next things to think about would be red versed blue back
stage lighting. Red is every
bit as useful and has less reflective powers or
spill on
stage. It also hurts the eyes less in going from black to lit areas. Some places use red instead of blue. Another thing to consider is places for the actors to gather should have a
bit more light than those closest to the
stage, along with any stairways needing minimum lighting levels. The talent is attracted to the most lit places naturally. Provide them with an area out of the way with a
bit more lighting and they will tend to stay out of your way a
bit more. In this way they also won't be leaning over you to read a love letter or section of the script in your light.
Another detail is lighting obstructions. An actor coming off
stage from somewhere brightly lit to somewhere that's for the most part dark needs obstructions lit. Move towards the light is a real thing to try to do in the off
stage area thus lamps mounted on the back wall of the
wing and pointing twoards
stage in a low light can give them somewhere to head towards if the
bulb is visible at a low
intensity. Light their path but also provide them somewhere to head towards. Make such lamps dim enough that they won't
blind those looking at them, and other sources not as visible from the direction of the
stage. Also it might be a good idea to make such a source to walk to in a different color such as red or green to make it stand out from other lighting.
Hope there are some useful ideas above. Another reason I would tend to stay away from baby pars, such as the
line voltage PAR 20 or it's little brother the
Birdie MR-16 can, along with baby 3" Fresnels - Inkies (which you can go down to 35
watt lamps for) is that such fixtures are cute and have a high theft ratio.