We have a dance show coming up with no tech time so we can't write cues. We are trying to figure out the best way to do on the fly color mixing that could still happen at slow or fast times. Our less expensive LED pars, we were able to set up the color mixing on the board very easily: with red blue green and worked right way.
But the S4 led are not working in the same way. We tried recording submasters different colors of the S4 leds which we could then busk into different colors. We have the intensity in one fader and the saturation in another fader. When we we try to add the hue into another for red, blue and green it will just switch to the other without fading. Are color palettes the best way to go? Or is there a better way to do?
Thanks so much,
Kathe
But the S4 led are not working in the same way. We tried recording submasters different colors of the S4 leds which we could then busk into different colors. We have the intensity in one fader and the saturation in another fader. When we we try to add the hue into another for red, blue and green it will just switch to the other without fading. Are color palettes the best way to go? Or is there a better way to do?
Thanks so much,
Kathe